© 1999 Microchip Technology Inc.

Preliminary

DS11187D-page 7

MCP100/101

MCP100/101 PRODUCT IDENTIFICATION SYSTEM

Sales and Support

Package:

TO = TO-92 (3-lead) [offered in bags only]

TT = SOT-23 (3-lead) [offered in tape & reel only]

Temperature

I= –40°C to +85°C (only offered in I)

Range

Bondout

Option

(TO-92 only)

D = D Bond Option (see bond option chart below)

H = H Bond Option

RESET/RESET

V

270 = 2.55

≤ V

300 = 2.85

≤ V

315 = 3.00

≤ V

450 = 4.25

≤ V

460 = 4.35

≤ V

475 = 4.50

≤ V

485 = 4.60

≤ V

Device:

MCP100 = Supervisor circuit with active low RESET output

MCP100T = Supervisor circuit with active low RESET output

(tape & reel)

MCP101 = Supervisor circuit with active high RESET output

MCP101T = Supervisor circuit with active high RESET output

(tape & reel)

MCP100/101—xxx b I /pp

RST

MCP100-xxxH I/TO

MCP101-xxxH I/TO

MCP100-xxxD I/TO

MCP101-xxxD I/TO

MCP100-xxx I/TT

MCP101-xxx I/TT

TO-92 with

‘D’ Bondout

TO-92 with

‘H’ Bondout

SOT-23-3

Product Identification Options for MCP100/101

Example of Product Identification:

2.70V in T0-92 package with ‘H’ bond option in industrial temp range,

the part number would be: MCP100-270H I/TO.

OR

RST

RST

OR

RST

RST

OR

RST

Data Sheets

Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-

mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:

1.

Your local Microchip sales office

2.

The Microchip Corporate Literature Center U.S. FAX: (480) 786-7277.

3.

The Microchip Worldwide Site (www.microchip.com)

Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.

New Customer Notification System

Register on our web site (www.microchip.com/cn) to receive the most current information on our products.

11187d.book Page 7 Friday, September 10, 1999 8:52 AM