Definite Purpose Contactors I Tyco Electronics

DPC Series

Definite Purpose

Contactors

Note: Specifications and availablity are subject to change without

notice. Consult data sheet 1-1773450-6 for detailed specifications.

ELECTRICAL (CONTINUED)

PRODUCT OFFERING

Note: All part numbers shown at right are RoHS compliant.

TTyyppiiccaall PPaarrtt N

Noo.. >>

DDPPCC

--

33

QQ

2255

CCSS

11

33

SSeerriieess::

DPC = Definite Purpose Contactor

PPaacckkaaggiinngg::

Y = Individual Pack

– = Bulk Pack

N

Nuum

mbbeerr ooff PPoolleess::

3 = 3 Pole 4 = 4 Pole

CCooiill VVoollttaaggee ((5500//6600 HHzz..))::

Q = 24VAC

U = 208/240VAC

H = 480VAC

T = 120VAC

V = 277VAC

Other AC coil voltages to 575V available, consult factory for details

CCoonnttaacctt RRaattiinnggss ((FFLLAA))::

20 = 20 Amps

25 = 25 Amps

30 = 30 Amps

40 = 40 Amps

M

Maaiinn CCoonnttaacctt TTeerrm

miinnaattiioonn TTyyppee::

CS = Combo Screws

SS = Sems Screws

BL = Box Lugs

Various terminal types may be mixed on a unit, consult factory for details.

CCooiill TTeerrm

miinnaattiioonn TTyyppee::

1 = Coil terminals up (toward keyhole on base)

2 = Coil terminals down (toward slot on base)

3 = Coil terminals up (toward keyhole on base) with #6-32 screw

4 = Coil terminals down (toward slot on base) with #6-32 screw

CCoonnttaacctt FFoorrm

m aanndd M

Maatteerriiaall::

X = Form X (ST-NO-DM), Silver Cadmium Oxide

R = Form X (ST-NO-DM), Silver Tin Oxide

Y = Form Y (ST-NC-DB), Silver Cadmium Oxide

H = Form Y (ST-NC-DB), Silver Tin Oxide

S = Contact forms may be mixed on a unit, consult factory for details.

CCuussttoom

meerr aanndd OOppttiioonn CCooddeess::

Leave Blank = Standard part, no customer-specific options

3B = Two pole unit in a three pole base with the center pole open (must specify “3” in step 3 above)

QQC = Quad quick connects for main contact terminals (available on non-coil terminal side only)

NQC = No quick connects for main contact terminals

NB = Narrow Base (available on three pole model only)

DR = DIN rail mounting adapter

NCR = Normally closed auxiliary switch on right side

NCL = Normally closed auxiliary switch on left side

SAR = SPDT auxiliary switch on right side

SAL = SPDT auxiliary switch on left side

NONCR = Normally open/normally closed auxiliary switch on right side

NONCL = Normally open/normally closed auxiliary switch on left side

SNCR = SPDT aux. switch on left side, normally closed auxiliary switch on the right

SNCL = SPDT aux. switch on right side, normally closed auxiliary switch on the left

### (3-digit numeric) = Factory-assigned customer number

Consult factory for other special requirements.

Coil Data

Nominal Inrush VA @ 50 Hz: 72 for Three Pole, 82 for Four Pole

Nominal Inrush VA @ 60 Hz: 64 for Three Pole, 73 for Four Pole

Nominal Sealed VA @ 50 Hz: 7 for Three Pole, 8 for Four Pole

Nominal Sealed VA @ 60 Hz: 6 for Three Pole, 7 for Four Pole