Data Sheet: F-OS

(1X1, 2X1,1X2, 2X2)

The F-OS optical switch is used for

system redundancy and backup.

With the use of an optical switch, a

redundant signal can be routed to an

active path in the event of a fault.

The F-OS optical switch features low insertion loss which is typically 0.6dB.

The unit offers three types of switching 1X1, 1x2, 2x1, or 2x2.

A front panel LCD provides system status and provides a means of programing the switch.

The F-OS can also be dynamically configured for CADM and OXC systems.

Technical Specifications

Performance

Index

Work wavelength

1260~1360nm,

1510~1610nm, 1310nm

Input power range

-30 ~ -20dBm, -10 ~ +10dBm,

+10 ~ +30dBm

Total insertion loss

2.0dB

Switch loss

<1.0dB(type,≤0.8dB)

Splitter loss

<0.5dB

Connector loss

<0.5dB

Echo loss

55 dB

Polarization dependent loss

0.1dB

Repeatability

≤± 0.02dB

Switch time

10ms

Voltage

135~250 VAC

Optical connector

FC/APC & SC/APC

Transmission power

500mW

Casing Size

19×1.75×14.2"

© 2013 Thor Broadcast – All rights reserved.

Contact: Sales@thorfiber.com 1-800-521-8467