CS10.243

C-Line

Do not operate this power supply with DC-input voltage. Use the CP10.241 or CP10.242 units instead.

A NTC inrush limitation circuit limits the input inrush current after turn-on of the input voltage.

The charging current into the EMI suppression capacitors is disregarded in the first microseconds after switch-on.

AC 100V

AC 120V

Inrush current

max.

at +40°C ambient, cold start

typ.

at +40°C ambient, cold start

Inrush energy

max.

at +40°C ambient, cold start

Fig. 5-1 Typical input inrush current behavior

1 >

2 >

3

3 >

Input:

120Vac

Output:

24V, 10A

Ambient:

+40°C

Upper curve:

Input current (50A / DIV)

Medium curve: Input voltage (100V / DIV)

Lower curve:

Output voltage (10V / DIV)

Time scale:

20ms / DIV

Jul. 2015 / Rev. 2.0 DS-CS10.243-EN

All parameters are specified at 24V, 10A, 120Vac, 60Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

6/25