Title

SPECIFICATION CONTROL DRAWING

SCD

55PC1811

ONE CONDUCTOR CABLE, SHIELDED, JACKETED, GENERAL PURPOSE, 600 VOLT

Date

7-9-15

Revision

C

This specification sheet forms a part of the latest issue of Raychem Specification 55PC.

COMPONENT WIRE - 55PC0811

SHIELD - TIN-COATED COPPER

JACKET - RADIATION-CROSSLINKED,

MODIFIED ETFE

CABLE CONSTRUCTION DETAILS

PART NUMBER

1/

CONDUCTOR

SIZE

(AWG)

SHIELD

SIZE

(AWG)

JACKET THICKNESS

(inch)

OUTSIDE DIAMETER

(inch)

WEIGHT

(lbs/1000 ft.)

LOWER

SPEC LIMIT

TARGET

WALL

LOWER

SPEC LIMIT

TARGET

VALUE

UPPER

SPEC LIMIT

TARGET

VALUE

UPPER

SPEC LIMIT

55PC1811-24-*

24

38

.0050

.0060

.069

.073

.077

5.74

6.04

55PC1811-22-*

22

38

.0050

.0060

.075

.079

.083

7.07

7.40

55PC1811-20-*

20

38

.0050

.0060

.084

.087

.091

9.14

9.49

55PC1811-18-*

18

38

.0050

.0060

.094

.097

.101

12.06

12.51

55PC1811-16-*

16

38

.0050

.0060

.102

.105

.109

14.44

14.92

55PC1811-14-*

14

38

.0050

.0065

.118

.122

.127

20.29

20.90

55PC1811-12-*

12

38

.0050

.0065

.137

.141

.145

28.43

29.16

55PC1811-10-*

10

38

.0050

.0065

.155

.163

.171

41.33

42.81

55PC1811-8-*

8

38

.0070

.0090

.219

.231

.243

73.26

75.89

55PC1811-6-*

6

38

.0070

.0090

.263

.277

.291

110.56

114.19

55PC1811-4-*

4

36

.0080

.0100

.334

.352

.370

178.54

184.20

55PC1811-2-*

2

36

.0085

.0110

.405

.426

.447

269.90

278.04

55PC1811-0-*

0

34

.0085

.0110

.488

.514

.540

408.52

420.27

Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.

Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES

AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.

Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

Phone: 1-800-227-8816

Fax: 1-650-361-6297

DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

© 2015 Tyco Electronics Corporation. All rights reserved.