SHT1x / SHT7x Relative Humidity & Temperature Sensor System

www.sensirion.com

v2.02 July 2004

9/9

6 Revision history

Date

Version

Page(s) Changes

February 2002

Preliminary 1-9

First public release

June 2002

Preliminary

Added SHT7x information

March 2003

Final v2.0

1-9

Major remake, added application information etc.

Various small modifications

V2.01

1-9

Typos, Graph labeling

July 2004

V2.02

1-9

Improved specifications, added SF1 information, improved wording

The latest version of this document and all application notes can be found at:

www.sensirion.com/en/download/humiditysensor/SHT1x_SHT7x.htm

7 Important Notices

7.1 Warning, personal injury

Do not use this product as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury. Failure to

comply with these instructions could result in death or

serious injury.

Should buyer purchase or use SENSIRION AG products for any

such unintended or unauthorized application, Buyer shall

indemnify and hold SENSIRION AG and its officers, employees,

subsidiaries, affiliates and distributors harmless against all claims,

costs, damages and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim of personal injury or

death associated with such unintended or unauthorized use, even

if such claim alleges that SENSIRION AG was negligent regarding

the design or manufacture of the part.

7.2 ESD Precautions

The inherent design of this component causes it to be sensitive to

electrostatic discharge (ESD). To prevent ESD-induced damage

and/or degradation, take normal ESD precautions when handling

this product.

See application note “ESD, Latchup and EMC” for more

information.

7.3 Warranty

SENSIRION AG makes no warranty, representation or guarantee

regarding the suitability of its product for any particular purpose,

nor does SENSIRION AG assume any liability arising out of the

application or use of any product or circuit and specifically

disclaims any and all liability, including without limitation

consequential or incidental damages. “Typical” parameters can

and do vary in different applications. All operating parameters,

including “Typical” must be validated for each customer

applications by customer’s technical experts.

SENSIRION AG reserves the right, without further notice, to

change the product specifications and/or information in this

document and to improve reliability, functions and design.

Copyright© 2001-2004, SENSIRION AG.

All rights reserved.

Headquarters and Sales Office

SENSIRION AG

Phone:

+ 41 (0)44 306 40 00

Eggbühlstr. 14

Fax:

+ 41 (0)44 306 40 30

P.O. Box

e-mail:

info@sensirion.com

CH-8052 Zürich

http://www.sensirion.com/

Switzerland

Sensirion humidity sensors are available from:

find your local representative at:

www.sensirion.com/reps