| 数据搜索系统,热门电子元器件搜索 |
|
FREQ 数据表(PDF) 15 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
FREQ 数据表(HTML) 15 Page - fujitsu semiconductor |
|
15 / 56 page ![]() 15 MB39A214A Limitation : development tool vendor use only FUJITSU SEMICONDUCTOR CONFIDENTIAL DS405-00007-1v0-E (4) Starting sequence When the EN1 pin (pin 2) or EN2 pin (pin 11) is set to the “H” level, the bias voltage is supplied from the VB pin. If the voltage of the VB pin exceeds the UVLO threshold voltage, the DC/DC converter starts operations and carries out the soft start. The soft start is a function used to prevent a rush current when the power is started. Activating the soft start initiates charging of the capacitor connected to the CS1 pin (pin 5) and CS2 pin (pin 8) and inputs the lamp voltage to the error comparator (Error Comp.) of each channel. The DC/DC converter generates the output voltage according to that lamp voltage. This results in the soft start operation that does not depend on the output load. The over voltage protection (OVP) and under voltage protection (UVP) functions are disabled while the soft start is active. <Timing chart> EN1 VB CS1 DRVH1 UVLO VTLH INTREF INTREF 0.805 V 1.6 V 1.6 V 0.805 V DRVL1 VOUT1 EN2 CS2 DRVH2 DRVL2 VOUT2 CH1 soft start completed UVLO release CH2 soft start completed |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |