5V AC Electrical Characteristics

Unless otherwise specified, all limits guaranteed for T

Boldface limits apply at the temperature extremes.

Symbol

Parameter

Conditions

Typ

(Note 5)

Units

SR

Slew Rate

(Note 7)

5.25

V/µs

min

GBW

Gain-Bandwdth Product

10.0

MHz

Φ

m

Phase Margin

72

Deg

G

m

Gain Margin

−11

dB

e

n

Input-Related Voltage Noise

f = 1 kHz

8.5

i

n

Input-Referred Current Noise

f = 1 kHz

0.2

THD

Total Harmonic Distortion

f = 1kHz, A

R

0.001

%

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-

tended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.

Note 2: Human body model, 1.5 k

Ω in series with 100 pF. Machine model, 200Ω in series with 100 pF.

Note 3: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the

maximum allowed junction temperature of 150˚C. Output currents in excess of 30 mA over long term may adversely affect reliability.

Note 5: Typical Values represent the most likely parametric norm.

Note 6: All limits are guaranteed by testing or statistical analysis.

Note 7: Connected as voltage follower with 1V step input. Number specified is the slower of the positive and negative slew rate.

www.national.com

5