Board description

EVAL6235PD

2/10

Doc ID 022128 Rev 1

1

Board description

The EVAL6235PD provides external connectors for the supply voltage, an external 5 V

reference for the logic inputs, three outputs for the motor and a 34-pin connector to control

the main functions of the board through the external interface board EVALPRACTISPIN.

Figure 1.

EVAL6235PD demonstration board

Table 1.

EVAL6235PD: connector and jumper description

Name

Type

Function

CN1

Power supply

Board power supply (VS)

CN2

Power supply

Logic power supply (5V)

CN3

Power outputs

Half-bridge power outputs

CN4

Signal connector Communication with interface board

JP1, JP2

Jumper

On-board 5V supply generation (closed)

J1

Strip connector

Hall effect sensors signals and power supply

S1

DIP switches

Allows enabling of the IC, to select to run in torque or speed mode, to

1.

Function available if board is running in stand-alone mode.