For further information contact your local STMicroelectronics sales office.

December 2013

DocID025534 Rev 2

1/6

MATRIX-M24SR

Antenna matrix for the M24SRXX-Y

Dynamic NFC/RFID tag IC family

Data brief

Features

Ready-to-use printed circuit board including 10

divisible antenna boards. Each of those antenna

board can be connected to an MCU thanks to the

The MATRIX-M24SR antenna boards are based

on the M24SR64-Y device which is compatible

with NFC phones. As such, any NFC phone can

communicate with those antenna boards.

• Various antenna designs

– 45 mm x 75 mm 13.56 MHz inductive

antenna etched on the PCB (ANT1)

– 20 mm x 40 mm 13.56 MHz inductive

antenna etched on the PCB (ANT2)

– 14 mm x 13.5 mm 13.56 MHz double layer

inductive antenna etched on the PCB

(ANT7)

– 45 mm x 65 mm 13.56 MHz inductive

antenna etched on the PCB with a DSILC6-

4P6 external ESD protection (ANT10)

– 4.7 µH SMD-inductor based antenna

(ANT11)

– 2 spare circuits for customer antenna

development (ANT12)

– Metal Tag 13 .56 MHz inductive antenna

etched on the PCB (ANT9)

– 20 mm round 13.56 MHz double layer

inductive antenna etched on the PCB

(ANT13)

– 31 mm x 30 mm 13.56 MHz double layer

inductive antenna etched on the PCB

(ANT14)

• M24SR64-Y Dynamic NFC/RFID tag IC

• RF disable input connection with 30 kΩ pull-

down resistor

• GPO (General Purpose Output) output

connection with 20 kΩ pull up resistor

• 100 pF and 10 nF capacitors for VCC

decoupling

www.st.com