ADL5511ACPZ-R7 datasheet(25/29 Pages) AD

部件名	ADL5511ACPZ-R7

功能描述	DC to 6 GHz Envelope and TruPwr RMS Detector

PDF	29 Pages

Scroll/Zoom	100%

制造商	AD [Analog Devices]

网页	http://www.analog.com

标志

25 / 29 page

ADL5511

Data Sheet

Rev. B | Page 24 of 28

EVALUATION BOARD

Figure 59 shows the schematic of the ADL5511 evaluation board.

This 4-layer board is powered by a single supply in the 4.75 V

to 5.25 V range. The power supply is decoupled by 100 pF and

0.1 µF capacitors.

Table 5 details the various configuration options of the evaluation

board. Figure 60 and Figure 61 show the bottom side and top

side layouts, respectively.

The RF input has a broadband match of 50 Ω using a single

75 Ω resistor at R5.

The VRMS output is accessible via a clip lead (a pad is also

available where an SMA connector is installed). The VENV

output is accessible via an SMA connector. For response-

time critical measurements where stray capacitance must

be minimized, R2 can be removed and a FET probe can be

attached to JP1 (JP1 must be installed).

Figure 59. Evaluation Board Schematic

ADL5511ACPZ-R7 数据表(PDF) 25 Page - Analog Devices