LIS2DH12 datasheet(45/53 Pages) STMICROELECTRONICS

45 / 53 page

DocID025056 Rev 6

45/53

LIS2DH12

8.24

INT2_SRC (35h)

Interrupt 2 source register. Read-only register.

Reading at this address clears the INT2_SRC (35h) IA bit (and the interrupt signal on the

INT2 pin) and allows the refresh of data in the INT2_SRC (35h) register if the latched option

was chosen.

8.25

INT2_THS (36h)

Table 65. INT2_SRC register

YHYL

XHXL

Table 66. INT2_SRC description

Interrupt active. Default value: 0

(0: no interrupt has been generated; 1: one or more interrupts have been generated)

Z high. Default value: 0

(0: no interrupt, 1: Z high event has occurred)

Z low. Default value: 0

(0: no interrupt; 1: Z low event has occurred)

Y high. Default value: 0

(0: no interrupt, 1: Y high event has occurred)

Y low. Default value: 0

(0: no interrupt, 1: Y low event has occurred)

X high. Default value: 0

(0: no interrupt, 1: X high event has occurred)

X low. Default value: 0

(0: no interrupt, 1: X low event has occurred)

Table 67. INT2_THS register

THS6

THS5

THS4

THS3

THS2

THS1

THS0

Table 68. INT2_THS description

THS[6:0]

Interrupt 2 threshold. Default value: 000 0000

1 LSb = 16 mg @ FS = 2 g

1 LSb = 32 mg @ FS = 4 g

1 LSb = 62 mg @ FS = 8 g

1 LSb = 186 mg @ FS = 16 g

LIS2DH12 数据表(PDF) 45 Page - STMicroelectronics

LIS2DH12 数据表(HTML) 45 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

数据表下载