| 数据搜索系统,热门电子元器件搜索 |
|
LED6001TR 数据表(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
LED6001TR 数据表(HTML) 1 Page - STMicroelectronics |
|
1 / 26 page ![]() This is information on a product in full production. June 2014 DocID025575 Rev 3 1/26 LED6001 PWM-dimmable single channel LED driver with integrated boost controller Datasheet - production data Features Switching controller section – 5.5 V to 36 V input voltage range – Very low shutdown current: ISHDN < 10 µA – Internal +5 V LDO for gate driver supply – Internal +3.3 V LDO for device supply – Fixed frequency peak current mode control – Adjustable (100 kHz to 1 MHz) switching frequency – External synchronization for multi-device applications – High performance external MOSFET driver – Cycle-by-cycle external MOSFET OCP – Fixed internal soft-start – Programmable output OVP – Boost, buck-boost and SEPIC topologies supported – Thermal shutdown with autorestart – Output short-circuit detection LED control section – Up to 60 V output voltage – Constant current control loop – High-side output current sensing circuitry – 30 to 300 mV differential sensing voltage – ± 4% output current reference accuracy – Output overcurrent protection – Sensing resistor failure protection – PWM dimming with auxiliary series switch – Analog dimming Applications Indoor and architectural LED lighting Emergency LED lighting Off-grid LED street lighting White goods Gaming/gambling machines Description The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin. The high-side current sensing, in combination with a P-channel MOSFET, provides an effective protection in case the positive terminal of the LED string is shorted to ground. The high precision current sensing circuitry allows a LED current regulation reference within 4% accuracy over the whole temperature range and production spread. A fault output (open-drain) informs the host system about faulty conditions: device overtemperature, output overvoltage (disconnected LED string) and LED overcurrent. HTSSOP-16 Table 1. Device summary Order code Package Packaging LED6001 HTSSOP-16 (exposed pad) Tube LED6001TR Tape and reel www.st.com |
类似零件编号 - LED6001TR |
|
类似说明 - LED6001TR |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |