AP400 datasheet(2/4 Pages) NEC

2 / 4 page

IP DECT AP400 series

AP400 features

Antenna

• Standard: internal omni-directional antenna

• Optional: external antenna (only on AP400E)

Call handling

features

• Crystal clear speech

• CLIP and name display

• Enquiry

• Conferencing

• Seamless integration with features of PBX

platform 1)

• Central Directory support 1)

• DTMF and call progress tones

• Overlap Sending

• Multiple call Appearance (2nd call)

Capacity

• Channels: 12 channels providing max. 11 simultaneous calls per AP400

• Maximum number of DECT Access Points is 750

• Maximum number of extensions is 18750 (this number is restricted by the maximum number of extensions

supported by the host PBX system)

Design

• Very compact unit (less than A5 size) with flexible antenna positioning

Housing

• Indoor use: mounting on wall or under ceiling

• Optional: weather proof outdoor housing

Localisation

support

• Supported frequency bands: EMEA, US, Latin America, Thailand 2)

• AP400 is available for EMEA, US and Canada, Latin America, Australia and specific Far East markets

• A dedicated AP400 configuration is available for Cruise Line ships that need the frequency band to be switched

from EMEA to North American band (based on GPS position)

Management

• DAP Manager runs on a standard Windows PC, can run in parallel with other applications

• DAP Manager is not required for daily use, unless support of wide area roaming or messaging is required

Messaging

• Messaging (LRMS) support

• Maximum message length support: 160

characters 3)

• Message broadcast support 1)

• Message waiting indication

• Easy menu programming

Messaging

• Messaging (LRMS) support

• Message waiting (voicemail)

• Support of different urgencies/priorities: Normal,

urgent and emergency

• Message broadcast support

• Set-up of voice call to call back number in message

Mobility/other

• Supports DECT compatible handsets

• Roaming and seamless handover

• Full non-blind slot radio

• Location detection 1)

Multi-site

support (main

and branch

offices)

• AP400 can be used in main and branch offices

• AP400s in a DECT location are part of the same

multi-cast group in the LAN

• For use in WAN no multi-cast is required

• DAP manager is required for wide area roaming

• Branch and main offices form one combined DECT

system

Network

aspects

• Connects directly to Local Area Network

Ethernet

• Multicast

• 10/100 Mbits Ethernet interface

• Support of G.711 and G.722 for CAT-iq 5)

• Support of G.729AB compression (with G7A add-on board)

Power supply

• Power over Ethernet (PoE) according to 802.3af

Security

• Secure DECT authentication on all channels

Service/

maintenance

• Software upgrading via air interface 4)

• Software upgrading of handsets via air interface 4)

• Software upgrading via headset connector (2.5 mm)

• LED status indicator

SIP protocol

support

• AP400 supports SIP protocol (See also the SIP Protocol Support table)

• The AP400 adds DECT mobility to a SIP enabled PBX (See also the paragraph on PBX platform compatibility)

Signalling

• Synchronisation requires 1 channel

User interface

• Web access (via DAP Manager)

• Directly from DAP Manager application PC

1) Features depend on the capabilities of the PBX and IP DECT system.

2) EMEA DECT frequency band is supported in most Asian markets as well.

3) The maximum number of characters depends on the PBX platform and application used for messaging.

4) See DECT handset datasheets for support of software upgrading through the air.

5) CAT-iq features are enabled by specific R6 versions.

AP400 数据表(PDF) 2 Page - NEC

AP400 数据表(HTML) 2 Page - NEC

Html Pages

1 2 3 4

数据表下载