Application information

PM8903A

22/33

Doc ID 024147 Rev 1

Electrolytic capacitors have a large capacitance to minimize voltage deviation during load

transients while they do not show the same ESR values as the MLCC, resulting then in

higher ripple voltages.

A mix between an electrolytic and MLCC capacitor can be used to minimize ripple as well as

reducing voltage deviation in dynamic mode.

The high bandwidth error amplifier of the PM8903A and external compensation enables a

wide range of output filter configurations (including all MLCC solutions) and fast transient

response.

6.5

Input capacitors

The input capacitor bank is designed considering, mainly, the input RMS current that

follows:

input capacitor ESR and, in the worst case, are:

I

rms

I

OUT

D1

D

–

()

⋅

⋅

=

PESR

I

⁄

()

2

⋅

=