STCC5021 datasheet(36/37 Pages) STMICROELECTRONICS

36 / 37 page

Revision history

STCC5011, STCC5021

36/37

DocID024660 Rev 6

Revision history

Table 9. Document revision history

Date

Revision

Changes

20-May-2013

Initial release.

24-Jun-2013

Updated Features on page 1 (added UL and CB

recognized components).

Updated note 3. below Table 2 (updated data, added

cross-reference to Figure 4).

Updated Table 4 (updated parameters and conditions to

│IREVERSE│, IOL(FAULT), IOL(CHARGING/ATTACH), ICTLx,

IOL(CHARGING/ATTACH) symbols, added IATTACH_EN

symbol).

Added Figure 4 on page 12.

Added Note: in Section 5.1 on page 13.

Added Section 5.9 on page 22.

06-Dec-2013

Updated Table 4 (updated min. conditions for IOS - RILIM

96 k

Ω and RILIM 33 kΩ).

Updated Table 5 (updated Host state column, added

footnote 1. and 2.below table).

Updated Section 5.7 (replaced equation by Equation 1 to

Equation 3).

Minor modifications throughout document.

06-Feb-2014

Replaced adjustable current limit with 2.8 A throughout

document

Table 4: added current limiter threshold condition “RILIM =

17.2 kΩ"

25-Feb-2014

Section 5.7: Power switch: updated Equation 2 and

Equation 3 and added explanation of same.

Table 8: Order codes: added “Marking”

26-Aug-2014

Description: added information about S4/S5 deep sleep

off states and G3 shutdown state.

Section 5.5: Attach detection: added information about

S4/S5 deep sleep off states and G3 shutdown state;

replaced Figure 6.

Section 5.6: Charging detection and safety timer: updated

text with respect to S4/S5 states and switching on the low-

power LDO; replaced Figure 9.

STCC5021 数据表(PDF) 36 Page - STMicroelectronics

STCC5021 数据表(HTML) 36 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

数据表下载