| 数据搜索系统,热门电子元器件搜索 |
|
UM1943 数据表(PDF) 5 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1943 数据表(HTML) 5 Page - STMicroelectronics |
|
5 / 28 page ![]() UM1943 Getting started DocID028304 Rev 1 5/28 Figure 3: X-NUCLEO-IHM07M1 plugged on STM32 Nucleo The interconnection between the STM32 Nucleo and the X-NUCLEO-IHM07M1 has been designed for full-compatibility with many STM32 Nucleo boards and no solder bridge modification is required. When stacked, the system is ready to operate with the connection of a BLDC/PMSM motor. For proper use, please respect the hardware and software settings. For the software details, refer to the X-CUBE-SPN7 software expansion documents available on www.st.com. 2.2.1 Hardware settings Table 1: Jumper settings Jumper Permitted configurations Default condition JP1 Selection for pull-up insertion (BIAS) in current sensing circuit OPEN JP2 Selection for op amp gain modification in current sensing circuit OPEN JP3 Selection for pull-up enabling in Hall/Encoder detection circuit CLOSED J9 Selection to supply the STM32 Nucleo board through the X-NUCLEO- IHM07M(1) OPEN J5 Selection for single/three shunt configuration. Set to single shunt by default 2-3 CLOSED J6 Selection for single/three shunt configuration. Set to single shunt by default 2-3 CLOSED J7 Debug connector for DAC. Available for probe connection OPEN Notes: (1)It is recommended to REMOVE jumper J9 before power-on on J1 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |