| 数据搜索系统,热门电子元器件搜索 |
|
ST10F296E 数据表(PDF) 90 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F296E 数据表(HTML) 90 Page - STMicroelectronics |
|
90 / 346 page ![]() Obsolete Product(s) - Obsolete Product(s) The bootstrap loader ST10F296E 90/346 6.7 Selective boot mode Selective boot mode is a sub-case of alternate boot mode. The following additional check is made when no signature of the alternate boot mode signature check is correct: Address 00’1FFCh is read again. ● If a value 0000h or FFFFh is obtained, a jump is performed to the standard bootstrap loader. ● If the value obtained is not 0000h or FFFFh: – High byte bits are disregarded – Low byte bits select which communication channel is enabled (see Table 44). ● 0xXX03 configures the selective bootstrap loader to poll for RxD0 and CAN1_RxD. ● 0xXX01 configures the selective bootstrap loader to poll RxD0 only (no bootloading via CAN). ● 0xXX02 configures the selective bootstrap loader to poll CAN1_RxD only (no bootloading via UART). ● other values will let the ST10F296E executing an endless loop into the Test-Flash. Table 44. Selective boot mode configurations Bit Function 0 UART selection 0: UART not watched for a start condition 1: UART is watched for a start condition 1 CAN1 selection 0: CAN1 not watched for a start condition 1: CAN1 is watched for a start condition 2-7 Reserved Must be programmed to 0 for upward compatibility Obsolete Product(s) - Obsolete Product(s) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |