STM32L100C6 datasheet(9/103 Pages) STMICROELECTRONICS

9 / 103 page

DocID024295 Rev 5

9/103

STM32L100C6 STM32L100R8/RB

Description

The ultra-low-power STM32L100C6 and STM32L100R8/RB devices incorporate the

connectivity power of the universal serial bus (USB) with the high-performance ARM®

Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory

protection unit (MPU), high-speed embedded memories (Flash memory up to 128 Kbytes

and RAM up to 10 Kbytes) and an extensive range of enhanced I/Os and peripherals

connected to two APB buses.

All the devices offer a 12-bit ADC, 2 DACs and 2 ultra-low-power comparators, six general-

purpose 16-bit timers and two basic timers, which can be used as time bases.

Moreover, the STM32L100C6 and STM32L100R8/RB devices contain standard and

advanced communication interfaces: up to two I2Cs and SPIs, three USARTs and a USB.

They also include a real-time clock with sub-second counting and a set of backup registers

that remain powered in Standby mode.

Finally, the integrated LCD controller has a built-in LCD voltage generator that allows to

drive up to 8 multiplexed LCDs with contrast independent of the supply voltage.

The ultra-low-power STM32L100C6 and STM32L100R8/RB devices operate from a 1.8 to

3.6 V power supply. They are available in the -40 to +85 °C temperature range. A

comprehensive set of power-saving modes allows the design of low-power applications.

STM32L100C6 数据表(PDF) 9 Page - STMicroelectronics