1/12

February 2003

s

3.6V TOLERANT INPUTS AND OUTPUTS

s

HIGH SPEED :

s

POWER DOWN PROTECTION ON INPUTS

AND OUTPUTS

s

SYMMETRICAL OUTPUT IMPEDANCE:

s

OPERATING VOLTAGE RANGE:

s

PIN AND FUNCTION COMPATIBLE WITH

74 SERIES 16374

s

LATCH-UP PERFORMANCE EXCEEDS

300mA (JESD 17)

s

ESD PERFORMANCE:

HBM > 2000V (MIL STD 883 method 3015);

MM > 200V

DESCRIPTION

The 74VCX16374 is a low voltage CMOS 16 BIT

D-TYPE FLIP-FLOP with 3 STATE OUTPUTS

NON

INVERTING fabricated with sub-micron

technology. It is ideal for low power and very high

speed 1.8 to 3.6V applications; it can be interfaced

to 3.6V signal environment for both inputs and

outputs.

These 16 bit D-TYPE flip-flops are controlled by

two clock inputs (nCK) and two output enable

inputs (nOE).

On thepositivetransitionof the (nCK), thenQ

outputs will be set to the logic state that were

setup at the nD inputs.

While the (nOE) input is low, the 8 outputs (nQ)

will be in a normal state (HIGH or LOW logic level)

and while high level the outputs will be in a high

impedance state.

Any output control does not affect the internal

operation of flip flops; that is, the old data can be

retained or the new data can be entered even

while the outputs are off.

All

inputs

and

outputs

are

equipped

with

protection circuits against static discharge, giving

them 2KV ESD immunity and transient excess

voltage.

74VCX16374

LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP (3-STATE)

WITH 3.6V TOLERANT INPUTS AND OUTPUTS

ORDER CODES

PACKAGE

TUBE

T & R

TSSOP

74VCX16374TTR

TSSOP

PIN CONNECTION

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)