AS1111C Standard Board

ams Eval Kit Manual

Page 3

[v1-00] 2015-Jan-20

Document Feedback

1

Introduction

This document describes the AS1111C Evaluation Kit.

The AS1111C is a LED driver designed to match current source bias for any color LED, including

white and blue. The device can drive up to 4 high-current LEDs, and the LED current is

programmable using an external resistor (RSET).

The AS1111C LED currents are 230 x ISET (per LED, type) at an LED cathode voltage (VSAT) of

150mV and 325 x ISET (type) at a VSAT of 1V, where ISET is the current through RSET connected

to pin CTRL.

The AS1111C incorporate a chip-enable feature via pin EN. When the devices are disabled, the

supply current drops down to less than 1µA. The AS1111C is available in a 8lead MLPD package

with 0.5mm pitch.

2

Kit Content

Figure 1: Kit Content

Label

Item

Comment

1

Evaluation Board

AS1111C (8lead MLPD 2x2mm package

with 0.5mm pitch)

3

Getting Started

Connect your supply to GND, VSET and VLED. Be shure that the jumpers are set like you can see

in the Hardware Description below.

1