CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

The solid polymer SPCX aluminum capacitor is

an ideal choice for general purpose applications

in audio-visual equipment, home appliances,

computers, office equipment, optical and measuring

equipment and industrial robots. The SPCX is a very

cost effective capacitor in a compact low-profile

package that is offered on tape and reel. The SPCX is

environmentally green and RoHS compliant.

Highlights

• A low-profile height of 1.9 mm

• Offered on tape and reel

• Can withstand 260 ºC reflow for 10 s

• 15 m

Ω ESR @ 100 kHz

• A great value in a small package

Specifica-

–40 ºC to +105 ºC

100 µF to 470 µF

2.0, 2.5, 4.0, 6.3 Vdc

±20 % (120 Hz @ 20 ºC)

Operating Temperature Range:

Capacitance Range:

Operating Working Range:

Capacitance Tolerance:

Surge Voltage:

Rated Ripple Current:

Vdc

2.0

2.5

4.0

6.3

Surge

2.5

3.1

5.0

8.0

See ratings table

Life Test:

Moisture Resis-

Apply rated voltage at +105 ºC ±2 ºC for 1000 h

* Leakage current: ≤ ratings table values

* Capacitance: ±10% of initial measured value

* DF: ≤ ratings table values

* Appearance: No abnormal change to occur

+60 ºC ±2 ºC @ 90% RH; rated voltage for 500 h

* Leakage current: ≤ rating table values

* Capacitance: +70%, –20% (2V, 2.5V)

+60%, –20% (4V)

+50%, –20% (6.3V)

of initial measured value

* DF: ≤200% of initial specified value

* Appearance: No abnormal change to occur

Shelf Life Test:

+105 ºC ±2 ºC for 500 h

Leakage current: ≤ rating table values

Capacitance: ±10% of initial measured value

DF: ≤ ratings table values

Appearance: No abnormal change to occur

Surge Test:

Test temperature is +15 ºC to +35 ºC in series with

a 1000 Ω resistor with the surge voltage applied

for 1000 cycles of 30±5 s (ON) and 5 min 30 s

(OFF)

• Leakage current: I≤0.1CV

• Capacitance: ±10% of initial measured value

• DF: ≤ the values in the ratings table

• Appearance: No abnormal change to occur

Vibration

10 Hz to 2000 Hz to 10 Hz frequency applied one

cycle per 20 min at a total amplitude of 1.5 mm.

Direction and duration of vibration will be 2 h each

in the X,Y and Z planes for total of 6 h with the

capacitor soldered in place.

• Appearance; No abnormal change to occur.

• Capacitance: Measured value to be stabilized

during test, when measured several times

within 30 min before completion of test.

Complies with the EU Directive 2002/95/EC

requirement restricting the use of Lead (Pb),

Mercury (Hg), Cadmium (Cd), Hexavalent

chromium (Cr(VI)), PolyBrominated Biphe-

nyls (PBB) andPolyBrominated Diphenyl

Ethers (PBDE).