Amphenol Canada Corp.

Page 2 of 2

605 Milner Avenue

Toronto, Ontario, Canada, M1B 5X6

Copyright © Amphenol Corporation 2013 • All rights reserved

+1 416 291 4401

www.amphenolcanada.com

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.

S6070C Rev 1.0

Electrical Characteristics

Contact resistance:

20 mΩ max.

Insulation resistance:

500 MΩ minimum at 500V DC for 2 minutes max.

Current rating:

1.5 Amps

Voltage rating:

125 Volts AC

DWV

1000 VAC, 60 Hz. 1 min.

LED forward DC current:

20mA typical

LED forward Voltage:

1.9 Volts max. @ 2mA (for single colors)

2.6 Volts max. @ 20mA (for Bi-colors)

LED reverse voltage:

5 Volts minimum

LED light intensity:

0.4 to 1.5 mcd @ 2mA (for single colors)

0.5 mcd min. @ 2mA (for Bi-colors)

LED wave length:

Yellow: 587± 7 nm measured @ 20mA

Green:

565± 6 nm measured @ 20mA

Red:

625± 5 nm measured @ 20mA

Mechanical Characteristics

Mating connector insertion force: 5.0 lbs. Maximum.

Mating connector pull retention force: 20 lbs Minimum.

Durability: 750 mating & unmating cycles

Recommended soldering temperature: Wave soldering peaked at 260° C for 5 seconds maximum.

Operating temperature: -40° C to +85° C

Material Requirements

RJSNE connectors are RoHS compliant.

Unless otherwise specified, the materials for each component shall be:

Insulator:

Contacts:

50µ” minimum Nickel on contact mating area.

Shield:

or stainless steel with tin dipped tail.

LED:

Available Documents

Drawing Numbers:

P-RJSNE-X38X-X8X

2X4 ports stackable modular jack, shielded, 8 position, 8 contacts, with tail length

option and LED option.

P-RJSNE-X08X-X8X

2X4 ports stackable modular jack, 8 position, 8 contacts, with tail length option

and LED option.

Contact factory or Authorized Amphenol representative for additional configurations

About Amphenol

Commercial Products

Amphenol’s commercial

connector products are

used in a variety of end

user applications

including networking,

telecom, server &

computer, storage &

HDD, consumer

electronics and

entertainment,

professional audio &

Industrial &

Military/Aerospace.

Related Products

RJULE

FRJAE

RJLSE

P/N RJULE‐4X182‐01 SHOWN 

SINGLE PORT REGULAR MOUNT,  

STANDARD SHIELD WITH SMT 

P/N FRJAE‐418 SHOWN 

SINGLE PORT, 8 POSITION,  

WITH FERRITE FILTER AND 

SHIELD (FRONT TABS) 

P/N RJLSE‐41181‐01 SHOWN 

SINGLE PORT REGULAR MOUNT,  

STANDARD SHIELD WITH SMT