Amphenol Canada Corp.

Page 2 of 2

605 Milner Avenue

Toronto, Ontario, Canada, M1B 5X6

Copyright © Amphenol Corporation 2011 • All rights reserved

+1 416 291 4401

www.amphenolcanada.com

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES

WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.

S6035C Rev 1.2

Electrical Characteristics

Contact resistance:

20 mΩ max.

Insulation resistance:

500 MΩ minimum at 500V DC for 2 minutes max.

Current rating:

1.5 Amps

Voltage rating:

125 Volts AC

DWV

1500 VAC, 60 Hz. 1 min.

Mechanical Characteristics

Mating connector insertion force: 5.0 lbs. Maximum.

Mating connector pull retention force: 20 lbs Minimum.

Durability: 750 mating & unmating cycles

Suitable for IR Reflow (Light Pipes to be installed after soldering)

Operating temperature: -55° C to +85° C

Material Requirements

RJSSE connectors are RoHS compliant.

Unless otherwise specified, the materials for each component shall be:

Insulator:

Contacts:

50µ” minimum Nickel on contact mating area.

Shield:

Light Pipe:

Available Documents

Drawing Numbers:

P-RJSSE-508X-XX

Surface Mount, 8 Position Modular Jack, Unshielded, optional Light Pipes

P-RJSSE-5381-04

4 Port, Surface Mount, 8 Position Modular Jack, Shielded with Light Pipes

P-RJSSE-7061

Surface Mount, 6 Position, Unshielded with Light Pipes

Contact factory or Authorized Amphenol representative for additional configurations

About Amphenol

Commercial Products

Amphenol’s commercial

connector products are

used in a variety of end

user applications

including networking,

telecom, server &

computer, storage &

HDD, consumer

electronics and

entertainment,

professional audio &

Industrial &

Military/Aerospace.

Related Products

RJULE

FRJAE

RJLSE

P/N RJULE‐4X182‐01 SHOWN 

SINGLE PORT REGULAR MOUNT,  

STANDARD SHIELD WITH SMT 

P/N FRJAE‐418 SHOWN 

SINGLE PORT, 8 POSITION,  

WITH FERRITE FILTER AND 

SHIELD (FRONT TABS) 

P/N RJLSE‐41181‐01 SHOWN 

SINGLE PORT REGULAR MOUNT,  

STANDARD SHIELD WITH SMT