TS985 datasheet(6/18 Pages) STMICROELECTRONICS

6 / 18 page

Electrical characteristics

TS985

6/18

DocID029328 Rev 1

Table 5. VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified)

Symbol

Parameter

Min.

Typ.

Max.

Unit

Vio

Input offset voltage, full Vicm range

0.5

Input offset voltage, Tmin ≤Tamb ≤Tmax

ΔVio/ΔT Input offset voltage drift vs. temperature

4.5

uV/°C

VHyst

Input hysteresis voltage

Iib

Input bias current (1), full Vicm range

Input bias current (1), Tmin ≤ Tamb ≤ Tmax

100

Iio

Input offset current, full Vicm range

Input offset current, Tmin ≤ Tamb ≤ Tmax

100

CMR

Common-mode rejection ratio, Vicm = 0 to 5 V

ICC

Supply current per comparator, no load - Vicm = 0 V

µA

Supply current per comparator, Tmin ≤ Tamb ≤ Tmax

VOH

High-level output voltage, ISource = 1 mA

4.85

4.9

High-level output voltage, Tmin ≤ Tamb ≤ Tmax

4.8

VOL

Low-level output voltage, ISink = 1 mA

Low-level output voltage, Tmin ≤ Tamb ≤ Tmax

ISink

VOUT = 0 V

Tmin ≤ Tamb ≤ Tmax

ISource

VOUT = VCC

Tmin ≤ Tamb ≤ Tmax

tPHL

Response time high to low (2), Vicm = 0 V, CL = 15 pF,

overdrive = 10 mV

1100

Response time high to low (2), Vicm = 0 V, CL = 15 pF,

overdrive = 100 mV

420

tPLH

Response time low to high (3), Vicm = 0 V, CL = 15 pF,

overdrive = 10 mV

1100

Response time low to high (3), Vicm = 0 V, CL = 15 pF,

overdrive = 100 mV

420

1. Maximum values include unavoidable inaccuracies of the industrial tests.

2. TPHL is measured when the output signal crosses a voltage level at 50% of VCC with the following conditions: inverting

input voltage (IN-) = VICM and non-inverting input (IN+), moving from VICM + 100mV to VICM - overdrive.

3. TPLH is measured when the output signal crosses a voltage level at 50 % of VCC with the following conditions: inverting

input voltage (IN-) = VICM and non-inverting input (IN+), moving from VICM - 100 mV to VICM + overdrive.

TS985 数据表(PDF) 6 Page - STMicroelectronics

TS985 数据表(HTML) 6 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

数据表下载