DocID15718 Rev 5

3/16

TS9222, TS9224

Absolute maximum ratings and operating conditions

16

1

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

1. All voltage values, except differential voltage are with respect to network ground terminal.

14

V

2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If

resistor must be added to limit input current.

±1

3. Do not exceed 14 V.

Storage temperature

-65 to +150

°C

SO8

TSSOP8

SO14

TSSOP14

4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-

circuits on all amplifiers. These values are typical.

125

120

66

100

°C/W

Maximum junction temperature

150

°C

ESD

TS9222

5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5k

Ω resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

2000

V

6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5

Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

120

7. Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

1500

ESD

TS9224

HBM: human body model(5)

3kV

MM: machine model(6)

100

V

CDM: charged device model(7)

SO14

TSSOP14

1.5

1

kV

Output short circuit duration

excessive heating. The maximum output current is approximately 80mA, independent of the magnitude of

Latch-up immunity

200

mA

Soldering temperature (10 sec), unleaded version

260

°C