| 数据搜索系统,热门电子元器件搜索 |
|
CS5480 数据表(PDF) 20 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS5480 数据表(HTML) 20 Page - Cirrus Logic |
|
20 / 70 page ![]() CS5480 20 DS980F3 These offsets can be either positive or negative, indicating crosstalk coupling either in phase or out of phase with the applied voltage input. The power offset registers can compensate for either condition. To use this feature, measure the average power at no load. Take the measured result (from the P1AVG (P2AVG) register), invert (negate) the value, and write it to the associated average active power offset register, P1OFF (P2OFF). 4.10 Average Reactive Power Offset The average reactive power offset registers, Q1OFF (Q2OFF), can be used to offset erroneous power sources resident in the system not originating from the power line. Residual reactive power offsets are usually caused by crosstalk into current channels from voltage channels, or from ripple on the meter’s or chip’s power supply, or from inductance from a nearby transformer. These offsets can be either positive or negative, depending on the phase angle between the crosstalk coupling and the applied voltage. The reactive power offset registers can compensate for either condition. To use this feature, measure the average reactive power at no load. Take the measured result from the Q1AVG (Q2AVG) register, invert (negate) the value and write it to the associated reactive power offset register, Q1OFF (Q2OFF). |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |