HET

Single-Pole for Solid Neutral

Series

Form No. HET Series

Page 2 of 2

Data Sheet: 2125

The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is

intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change

design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-

tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Breakaway Holders

Catalog Symbol: HET-AW-RLC-A, HET-AW-RLC-B,

HET-AW-RLC-C, HET-AW-RLC-J, HET-AW-RYC,

HET-BW-RLC-B, HET-BW-RYC, HET-JW, HET-JW-RLC-J,

HET-JW-RYC, and HET-AW

In-Line Fuseholders, Single-Pole

Example:

A single-pole, in-line, breakaway holder for a neutral is

requested. A single #10 solid, copper crimp is on the load

side. A single #10, solid wire and a copper crimp is needed

on the line side.

1. Choose HET- series.

2. Choose “A” from 1st page for load side.

3. Choose “W” for breakaway requirement.

4. Choose “RLC-A” for breakaway receptacle on line side.

Complete Catalog Number: HET-AW-RLC-A

Recommended Torque on Coupling Nut: 10-20 in-lb.

Catalog and Specification Data

Breakaway Receptacles

Conductor Data

Catalog

Terminal Type

Size

Symbol

Line

Terminal

(3)

Copper Crimp

#12 to #8

1

•

•

-RLC-A

#6

1

•

•

-RLC-B

#4

1

•

•

-RLC-C

Copper Set-Screw

#12 to #3

1

•

•

-RLC-J

#12 to #3

2

•

•

-RYC

Solid Breakaway

(Required with

W

breakaway

Receptacle)

Ordering Information:

Load

Line

Terminal

Terminal

W

HET

7-16-03

N03082