| 数据搜索系统,热门电子元器件搜索 |
|
AX-SFUS-API 数据表(PDF) 1 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AX-SFUS-API 数据表(HTML) 1 Page - ON Semiconductor |
|
1 / 20 page ![]() © Semiconductor Components Industries, LLC, 2017 July, 2017 − Rev. 3 1 Publication Order Number: AX−SFUS/D AX-SFUS, AX-SFUS-API Ultra-Low Power, AT Command / API Controlled, Sigfox) Compliant Transceiver IC for Up-Link and Down-Link OVERVIEW Circuit Description AX−SFUS and AX−SFUS−API are ultra−low power single chip solutions for a node on the Sigfox network with both up− and down−link functionality. The AX−SFUS chip is delivered fully ready for operation and contains all the necessary firmware to transmit and receive data from the Sigfox network in the US (SIGFOX RCZ2 region). It connects to the customer product using a logic level RS232 UART. AT commands are used to send frames and configure radio parameters. The AX−SFUS−API variant is intended for customers wishing to write their own application software based on the AX−SF−LIB−1−GEVK library. Features Functionality and Ecosystem • Sigfox up−link and down−link functionality controlled by AT commands or API • The AX−SFUS and AX−SF−API ICs are part of a whole development and product ecosystem available from ON Semiconductor for any Sigfox requirement. Other parts of the ecosystem include ♦ Ready to go development kit DVK−SFEU−[API]−1−GEVK including a 2 year Sigfox subscription ♦ Sigfox Ready® certified reference design for the AX−SFUS and AX−SFUS−API ICs General Features • QFN40 5 mm x 7 mm package • Supply range 2.7 V* − 3.6 V • −40°C to 85°C • Temperature sensor • Supply voltage measurements *Includes the RF frontend module, circuit as in Figure 5. The AX−SFUS chip alone is operational from 1.8 V to 3.6 V, a supply voltage below 2.0 V is considered an extreme condition. **Includes the RF frontend module, circuit as in Figure 5. • 8 GPIO pins ♦ 2 GPIO pins with selectable voltage measure functionality, differential (1 V or 10 V range) or single ended (1 V range) with 10 bit resolution ♦ 2 GPIO pins with selectable sigma delta DAC output functionality ♦ 2 GPIO pins with selectable output clock ♦ 3 GPIO pins selectable as SPI master interface ♦ RX/TX switching Control Power Consumption** • Ultra−low Power Consumption: ♦ Charge required to send a Sigfox OOB packet at 24 dBm output power: 0.28 C ♦ Deepsleep mode current: 100 nA ♦ Sleep mode current: 1.3 mA ♦ Standby mode current: 0.5 mA ♦ Continuous radio RX−mode at 905.2 MHz : 34 mA ♦ Continuous radio TX−mode at 902.2 MHz 230 mA @ 24 dBm High Performance Narrow−band Sigfox RF Transceiver • Receiver ♦ Carrier frequency 905.2 MHz ♦ Data−rate 600 bps FSK ♦ Sensitivity −128 dBm @ 600 bps, 905.2 MHz, GFSK ♦ 0 dBm maximum input power • Transmitter ♦ Carrier frequency 902.2 MHz ♦ Data−rate 600 bps PSK ♦ High efficiency, high linearity integrated power amplifier ♦ Maximum output power 24 dBm Applications Sigfox networks up−link and down−link. www.onsemi.com |
类似零件编号 - AX-SFUS-API |
|
类似说明 - AX-SFUS-API |
|
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |