MPXM2010GS datasheet(193/670 Pages) MOTOROLA

193 / 670 page

3–47

Motorola Sensor Device Data

www.motorola.com/semiconductors

200 kPa On-Chip Temperature

Compensated & Calibrated

Pressure Sensors

The MPX2202/MPXV2202G device series is a silicon piezoresistive pressure sensor

providing a highly accurate and linear voltage output — directly proportional to the

applied pressure. The sensor is a single monolithic silicon diaphragm with the strain

gauge and a thin–film resistor network integrated on–chip. The chip is laser trimmed for

precise span and offset calibration and temperature compensation. They are designed

for use in applications such as pump/motor controllers, robotics, level indicators, medical

diagnostics, pressure switching, barometers, altimeters, etc.

Features

• Temperature Compensated Over 0°C to +85°C

• Easy–to–Use Chip Carrier Package Options

• Available in Absolute, Differential and Gauge Con-

figurations

Application Examples

• Pump/Motor Controllers

• Robotics

• Level Indicators

• Medical Diagnostics

• Pressure Switching

• Barometers

• Altimeters

Figure 1 illustrates a block diagram of the internal

circuitry on the stand–alone pressure sensor chip.

Figure 1. Temperature Compensated Pressure

Sensor Schematic

SENSING

ELEMENT

THIN FILM

TEMPERATURE

COMPENSATION

AND

CALIBRATION

CIRCUITRY

Vout+

Vout–

GND

VOLTAGE OUTPUT versus

APPLIED DIFFERENTIAL PRESSURE

The differential voltage output of the sensor is

directly proportional to the differential pressure applied.

The absolute sensor has a built–in reference vacu-

um. The output voltage will decrease as vacuum,

relative to ambient, is drawn on the pressure (P1) side.

The output voltage of the differential or gauge sensor

increases with increasing pressure applied to the

pressure (P1) side relative to the vacuum (P2) side.

Similarly, output voltage increases as increasing vacu-

um is applied to the vacuum (P2) side relative to the

pressure (P1) side.

Preferred devices are Motorola recommended choices for future use

and best overall value.

Replaces MPX2200/D

MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

MPX2202

MPXV2202G

SERIES

0 to 200 kPa (0 to 29 psi)

40 mV FULL SCALE SPAN

(TYPICAL)

Motorola Preferred Device

SMALL OUTLINE PACKAGE

SURFACE MOUNT

PIN NUMBER

NOTE: Pin 1 is noted by the notch in

the lead.

Gnd

+Vout

N/C

4–Vout

N/C

MPXV2202DP

CASE 1351

MPXV2202GP

CASE 1369

UNIBODY PACKAGE

MPX2202AP/GP

CASE 344B

MPX2202ASX/GSX

CASE 344F

MPX2202A/D

CASE 344

MPX2202DP

CASE 344C

PIN NUMBER

Gnd

+Vout

–Vout

NOTE: Pin 1 is noted by the notch in

the lead.

MPX2202GVP

CASE 344D

REV 2

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPXM2010GS 数据表(PDF) 193 Page - Motorola, Inc

MPXM2010GS 数据表(HTML) 193 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载