MPXM2010GS datasheet(189/670 Pages) MOTOROLA

189 / 670 page

3–43

Motorola Sensor Device Data

www.motorola.com/semiconductors

200 kPa On-Chip Temperature

Compensated & Calibrated

Pressure Sensors

The MPX2200 series device is a silicon piezoresistive pressure sensor providing a

highly accurate and linear voltage output — directly proportional to the applied pressure.

The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin–film

resistor network integrated on–chip. The chip is laser trimmed for precise span and

offset calibration and temperature compensation. They are designed for use in

applications such as pump/motor controllers, robotics, level indicators, medical

diagnostics, pressure switching, barometers, altimeters, etc.

Features

• Temperature Compensated Over 0°C to +85°C

•±0.25% Linearity (MPX2200D)

• Easy–to–Use Chip Carrier Package Options

• Available in Absolute, Differential and Gauge Configurations

Application Examples

• Pump/Motor Controllers

• Robotics

• Level Indicators

• Medical Diagnostics

• Pressure Switching

• Barometers

• Altimeters

Figure 1 illustrates a block diagram of the internal circuitry on the stand–alone

pressure sensor chip.

Figure 1. Temperature Compensated Pressure Sensor Schematic

SENSING

ELEMENT

THIN FILM

TEMPERATURE

COMPENSATION

AND

CALIBRATION

CIRCUITRY

Vout+

Vout–

GND

VOLTAGE OUTPUT versus APPLIED DIFFERENTIAL PRESSURE

The differential voltage output of the sensor is directly proportional to the differential

pressure applied.

The absolute sensor has a built–in reference vacuum. The output voltage will

decrease as vacuum, relative to ambient, is drawn on the pressure (P1) side.

The output voltage of the differential or gauge sensor increases with increasing

pressure applied to the pressure (P1) side relative to the vacuum (P2) side. Similarly,

output voltage increases as increasing vacuum is applied to the vacuum (P2) side

relative to the pressure (P1) side.

MOTOROLA

SEMICONDUCTOR TECHNICAL DATA

MPX2200

SERIES

0 to 200 kPa (0 to 29 psi)

40 mV FULL SCALE SPAN

(TYPICAL)

UNIBODY PACKAGE

MPX2200AP/GP

CASE 344B

MPX2200GVP

CASE 344D

MPX2200A/D

CASE 344

MPX2200DP

CASE 344C

PIN NUMBER

Gnd

+Vout

–Vout

NOTE: Pin 1 is noted by the notch in

the lead.

REV 9

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

MPXM2010GS 数据表(PDF) 189 Page - Motorola, Inc

MPXM2010GS 数据表(HTML) 189 Page - Motorola, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载