| 数据搜索系统,热门电子元器件搜索 |
|
LT6232IGN 数据表(PDF) 6 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LT6232IGN 数据表(HTML) 6 Page - Linear Technology |
|
6 / 24 page ![]() LT6230/LT6230-10/ LT6231/LT6232 6 sn623012 623012fas SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS VOS Input Offset Voltage LT6230, LT6230-10 100 500 µV LT6231S8, LT6232GN 50 350 µV LT6231DD 75 450 µV Input Offset Voltage Match 100 600 µV (Channel-to-Channel) (Note 6) IB Input Bias Current 510 µA IB Match (Channel-to-Channel) (Note 6) 0.1 0.9 µA IOS Input Offset Current 0.1 0.6 µA Input Noise Voltage 0.1Hz to 10Hz 180 nVP-P en Input Noise Voltage Density f = 10kHz 1.1 1.7 nV/ √Hz in Input Noise Current Density, Balanced Source f = 10kHz, RS = 10k 1 pA/ √Hz Unbalanced Source f = 10kHz, RS = 10k 2.4 pA/ √Hz SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS PSRR Match (Channel-to-Channel) (Note 6) VS = 3V to 10V q 79 dB Minimum Supply Voltage (Note 7) q 3V VOL Output Voltage Swing LOW (Note 8) No Load q 60 mV ISINK = 5mA q 210 mV VS = 5V, ISINK = 15mA q 510 mV VS = 3.3V, ISINK = 15mA q 390 mV VOH Output Voltage Swing HIGH (Note 6) No Load q 70 mV ISOURCE = 5mA q 220 mV VS = 5V, ISOURCE = 20mA q 675 mV VS = 3.3V, ISOURCE = 15mA q 440 mV ISC Short-Circuit Current VS = 5V q ±15 mA VS = 3.3V q ±15 mA IS Supply Current per Amplifier q 4.4 mA Disabled Supply Current per Amplifier ENABLE = V+ – 0.2V q 1 µA IENABLE ENABLE Pin Current ENABLE = 0.3V q –100 µA VL ENABLE Pin Input Voltage LOW q 0.3 V VH ENABLE Pin Input Voltage HIGH q V+ – 0.2V V Output Leakage Current ENABLE = V+ – 0.2V, VO = 1.5V to 3.5V q 1 µA tON Turn-On Time ENABLE = 5V to 0V, RL = 1k, VS = 5V q 300 ns tOFF Turn-Off Time ENABLE = 0V to 5V, RL = 1k, VS = 5V q 72 µs SR Slew Rate VS = 5V, AV = –1, RL = 1k, VO = 1.5V to 3.5V q 31 V/ µs LT6230-10, AV = –10, RL = 1k, q 185 V/ µs VO = 1.5V to 3.5V FPBW Full Power Bandwidth (Note 9) VS = 5V, VOUT = 3VP-P q 3.3 MHz LT6230, LT6231, LT6232 ELECTRICAL CHARACTERISTICS The q denotes the specifications which apply over –40°C < T A < 85°C temperature range. VS = 5V, 0V; VS = 3.3V, 0V; VCM = VOUT = half supply, ENABLE = 0V, unless otherwise noted. (Note 5) TA = 25°C, VS = ±5V, VCM = VOUT = 0V, ENABLE = 0V, unless otherwise noted. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |