13/24

M29F102BB

MAXIMUM RATINGS

Stressing the device above the rating listed in the

Absolute Maximum Ratings table may cause per-

manent damage to the device. Exposure to Abso-

lute Maximum Rating conditions for extended

periods may affect device reliability. These are

stress ratings only and operation of the device at

these or any other conditions above those indicat-

ed in the Operating sections of this specification is

not implied. Refer also to the STMicroelectronics

SURE Program and other relevant quality docu-

ments.

Note: 1. Except for the rating "Operating Temperature Range", stresses above those listed in Table 7., Absolute Maximum Ratings (1) may

cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions

above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating condi-

tions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant qual-

ity documents.

2. Minimum Voltage may undershoot to –2V during transition and for less than 20ns during transitions.

and the European directive on Restrictions on Hazardous Substances (RoHS) 2002/95/EU.

Symbol

Parameter

Value

Unit

Ambient Operating Temperature

0 to 70

°C

Temperature Under Bias

–50 to 125

°C

Storage Temperature

–65 to 150

°C

Lead Temperature during Soldering

(3)

(2)

Input or Output Voltage

–0.6 to 6

V

Supply Voltage

–0.6 to 6

V

Identification Voltage

–0.6 to 13.5

V