Unit：mm

http://www.ddknet.co.jp

BNC75　Series

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

○ Assembly Instruction（3）

8

Male Contact

Clamp

Gasket

Washer

Nut

Plug Shell

15

6

3

Male Contact

Clamp

Gasket

Washer

Nut

Plug Shell

15

6

3

①

②

③

④

⑤

① Cut the cable as fig.1

Please be carefule to not damage the outer

conductor.

fig.2. The clamp is holded on the sheath and pick

the outer conductor.

③ Cut the insulator and center conductor.

　Turn down the outer conductor to the clamp and cut

the outer conductor along the clamp. Cut the

insulator and center conductor as fig.3.

Please be careful to not damage the center

conductor.

④ Solder up the contact to the center conductor.

Please be careful to not be swelled up the solder.

Please be careful to not gap between contact and

insulator.

Please be careful to not deform the insulator by

soldering.

⑤ Inser the above contact into the body and

screw up the nut.

Please screw up the nut by wrench.

Parts Configulration