3220 Commander Drive, Suite 102 Carrollton, TX 75006

www.PickerComponents.com

Sales: (972) 713-6272

(888) 997-3933

Fax: (972)735-0964

e-mail: sales@pickercomponents.com

Dimensions are listed for reference purposes only.

Specifications and Availability subject to change without notice.

PCS52 Rev B 4/18/2017

2 of 4

PRECAUTIONS

PCS52

PCS52

1)

Whenchoosing a Solid State Relay (SSR), note the actual loadcurrent and ambient temperature and reference the Characteristic Curves below.

2)

SSRs require a adequate heat sinking or other effective cooling measures.

3)

With ambient temperature above 25°C refer to the curve of Max. Load Current vs Ambient Temperature for load current derating.

4)

5)

recommended screw installation torque asfollows :

M4 screw mounting

will damage the SSR withheat generated from connections.Also, excessive

6)

to the Current Load. With any heat sink test that the SSR basetemperature does not exceed 65"C.

7)

When using the PCS52 relay with an inductive load, a diode must be used in reverse parallel orientation otherwise excess voltage will easily damage the

current

8)

Listed parameters are based on resistive loads. Do not use the relay beyond the described current, temperature, load or voltage limits as

described in this data sheet.

DIMENSIONS (mm)

QUICK CONNECT

MOUNTING LAYOUT

WIRING DIAGRAM

SCREW TERMINAL