MS1003SH･MS1004SH

Application Note Ver.2.2

SHINDENGEN ELECTRIC MFG. CO. , LTD

2/41

Precautions

Thank you for purchasing this product.

To ensure safety, keep the following warnings and cautions in mind at all times when using this IC.

Warning

!

Improper handling may result in death, serious injury, or significant property damage.

Caution

!

Improper handling may result in minor injuries or minor damage to property.

Warning

!

!

While we strive to improve quality and reliability at all times, semiconductor products will

malfunction at a certain rate. To prevent or limit the scope of injury, fire, or other societal damage that

may result from product malfunctions, it is your responsibility to take steps to ensure that your designs

incorporate suitable safety factors, including appropriate redundancy, fire prevention, and false

operation prevention measures.

The semiconductor product described in this document is not designed or manufactured for use in

devices or systems in which malfunctions would threaten human life or result in injury. Nor is it

designed or manufactured for use in other devices or systems requiring mission-critical quality and

reliability. Please consult with us before using the product in any of the following special or specific

applications:

Special applications

Transport equipment (e.g., automobiles and ships), communications equipment for backbone

networks, traffic signal equipment, disaster or crime prevention equipment, medical devices, various

types of safety equipment

Specific applications

Nuclear power control systems, aircraft equipment, aerospace equipment, submarine repeaters,

life-support medical equipment

Please consult with us before using any IC products in equipment expected to run continuously for

extended periods, even if the application in question has no special requirements.

Caution

!

!

!

!

!

Never repair or modify the product. Doing so may result in serious accidents.

<<Electric shock, destruction, fire, or malfunction may result.>>

In the event of problems, an excessive voltage may arise at the output terminal, or the voltage may

drop. Try to anticipate malfunctions and load issues and confirm that the end equipment is adequately

protected (e.g., by overvoltage or overcurrent protection).

Check the polarity of the input and output terminals. Make sure they are correctly connected before

turning on power.

<<The protective element may blow, or smoke or fire may result.>>

Use the specified input voltage. Provide a protective element in the input line.

<<Smoke or fire may result in event of a problem.>>

In the event of a malfunction or other anomaly, turn power off immediately and contact us.

 The contents of this document are subject to change without notice due to product improvements.

 You must provide written agreement concerning the specifications before starting to use the device.

 We have made every effort to confirm that all information provided in this document is correct and reliable. However, we take no

responsibility for losses or damages incurred or infringements of patents or other rights resulting from use of the information.

 This document neither warrants nor authorizes the right to exercise intellectual property rights or any other rights belonging to

Shindengen or third parties.

 No part of this document may be duplicated or reproduced in any form without prior consent from Shindengen.