Specification

(25°C and Vs ± 15 Vdc)

D70 Series

Pin-Out and Package Data

Ordering Information

We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,

recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,

recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.

IN-00D70-01

1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176

e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com

Impedance

10 k

W min.

Voltage Range

± 10 Vpeak

Max. Safe Voltage

± Vs

Analog Output Characteristics

Impedance

1

W

Linear Operating Range

± 10 V

± 10 mA

± 10 mV

Offset Temp. Coeff.

50

mV /°C

Power Supply (±Vs)

Rated Voltage

± 15 Vdc

Operating Range

± 5 to ± 18 Vdc

Maximum Safe Voltage

± 18 Vdc

Quiescent Current (max.)

8 Pole

± 18 mA

6 Pole

± 15 mA

4 Pole

± 10 mA

Temperature

Operating

0 to + 70°C

Storage

- 25 to + 85°C

Notes:

1. Input and output signal voltage referenced to supply

common.

2. Output is short circuit protected to common.

DO NOT CONNECT TO ±VS.

3. Adjustable to zero.

4.

How to specify Corner Frequencies:

Corner frequencies are specified by attaching a three digit frequency designa-

tor to the basic model number. Corner frequencies can range from 100 Hz to

50.0 kHz.

Optional Offset Adjustment

5

Filter Type

L - Low Pass

H - High Pass

D70L8B-849 Hz

Transfer Function

B - Butterworth

L - Bessel

Ordering Information

No. of Poles

8

6

4

-3 dB Corner Frequency

4

e.g., 849 Hz

2.50 kHz

33.3 kHz

Recommend PC board hole 0.025”

Filter Mounting Assembly-See FMA-01A