Pilkor components

PFC Input Capacitors

PCMP 372

Metallized Polypropylene film capacitors

(MPP)

262

MOUNTING

NORMAL USE

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers

are designed for mounting on printed-circuit boards by means of automatic insertion machines.

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK

. For pitches of 15 mm the capacitors shall be mechanically fixed by the leads

. For larger pitches the capacitors shall be mounted in the same way and the body clamped.

SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD

The maximum length and width of film capacitors are shown in the following drawing ;

- Eccentricity as in drawing.

The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

Eccentricity

Imax = I +0.3 mm

b max = b + 0.3mm