1-483

1-483

Designed for Rugged Excellence

Industrial 4-port lite-managed PCI Ethernet switch card with

4x10/100Base-T(X)

ICS-4040

▪

Fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms

over 250 units of connection)

▪

Open-Ring support the other vendor's ring technology in open

architecture

▪

Supports 4x10/100Base-T(X) ports

▪

Multiple Redundant Ethernet technology RSTP/STP, supported to

protect your industrial network

▪

SNMP v1/v2/v3 support for secure network management

▪

Configurable by Web-based and Windows utility (Open-Vision)

▪

Event notification through Syslog, Email, and SNMP trap

▪

Complied with PCI Bus specification, Rev 2.2

ICS-4040 is a lite-managed redundant ring Ethernet switch card with PCI-Bus and 4x10/100Base-T(X) ports. ICS-4040 could be installed on any IPC

motherboard with PCI socket to make the IPC/embedded system able to communicate the other devices redundantly. Meanwhile, the network could feature

Ethernet network redundancy by the fastest redundant ring protocol, O-Ring (recovery time < 10 ms over 250 units of connections ) and the standard

redundant protocols, RSTP/STP (IEEE 802.1w/D). Accordingly, the mission-critical communications could be protected from network any interruptions or

malfunctions. Further, ICS-4040 features an external redundant DC power input. Hence, even if the IPC motherboard fails, the data transmission could bypass

the failed IPC motherboard and the network will still work properly. Therefore, ICS-4040 is the best solution to IPC/embedded systems to feature Ethernet

network redundancy.

ORing's switches are intelligent switches. Being different from other

traditional redundant switches, ORing provides a set of Windows utility

(Open-Vision) for users to manage and monitor all of industrial

Ethernet switches on the industrial network.

Introduction

Open-Vision

Network connection

Monitoring and Configuration interface

Features

v1.4 / Oct, 2010

Industrial Ethernet Switch Lite-Managed PCI Ethernet Switch Card

ICS-4040