Unit：mm

http://www.ddknet.co.jp

TNC　Series

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

○Assembly Instruction（3）

Body

Sleeve

Boot

Contact assembly

19

Outer Conductor

Sheath

Boot

Sleeve

Cable

7

4

4

10

Insulator

Cente Conductor

（Cut off afterpre-soldering)

Outer Conductor

Aluminum foil tape

Body

Boot

Sleeve

1

Contact assembly

Soldering

Body

Sleeve

Boot

Contact assembly

19

Outer Conductor

Sheath

Boot

Sleeve

Cable

7

4

4

10

Insulator

Cente Conductor

（Cut off afterpre-soldering)

Outer Conductor

Aluminum foil tape

Body

Boot

Sleeve

1

Contact assembly

Soldering

①

②

③

④

⑤

① Insert the boot and sleeve into the cable and

cut the cable as fig.1. Please be careful to not

damage the outer conductor.

② Cut the cable as fig.2. Cut the center conductor

after pre-soldering.

③ Insert the contact between outer conductor and

aluminum foil tape. Solder the contact with

center conductor.

When the solder is stick out, please shave

the extra solder along the contact.

④ Cover the sleeve on the outer conductor and

⑤ Insert the above contact into the body and

screw. Cover the boot on the root of the body.

11

Parts Configulration