Unit：mm

http://www.ddknet.co.jp

TNC　Series

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

○ Assembly Instruction（5）

Body

Contact

Insulator

Sleeve

Ferule

Heat-shrinkable tube

A

Sheath

Outer Conductor

Insulator

Ferule

Spread the top

Center Conductor

（Pre-soldering）

Sleeve

B

●

C

Cut the center conductor after pre-soldering

Contact

Insulator

Soldering

No gap

same level

Body

Crimping Dies

Heat-shrinkable tube

Body

Contact

Insulator

Sleeve

Ferule

Heat-shrinkable tube

A

Sheath

Outer Conductor

Insulator

Ferule

Spread the top

Center Conductor

（Pre-soldering）

Sleeve

B

●

C

Cut the center conductor after pre-soldering

Contact

Insulator

Soldering

No gap

same level

Body

Crimping Dies

Heat-shrinkable tube

①

②

③

④

⑤

⑥

① Cut the cable as fig.1.

Please be careful to not damage the outer

conductor.

Part Number

A

TNC-PJ-1.5DQEW-CR10-CF

13.0mm

TNC-PJ-2H-1.5D-CR10-CF

10.0mm

② Insert the ferule on the outer conductor and spread

the top of the outer conductor.

③ Insert the sleeve and cut the cable as fig.3.

　Press in the sleeve between outer conductor and

insulator. Cut off the extra outer conductor along the

sleeve. Cut the insulator and center conductor as below

table. Cut the center conductor after pre-soldering.

Please be careful to not damage the center conductor.

Part Number

B

C

TNC-PJ-1.5DQEW-CR10-CF

5.7mm

3.0mm

TNC-PJ-2H-1.5D-CR10-CF

4.0mm

3.0mm

④ Insert the insulator on the insulator of the cable

and solder the contact with center conductor.

When the solder is stick out, please

shave the extra solder along the contact.

⑤ Insert the above contact into the body. Match the

　 key in the insulator and keyway of the contact.

Crimp the root of body as fig.5.

⑥ Cover the heat-shrinkable tube on the root of

the body and heat up.

13

Parts Configulration

Part Number

Tool

TNC-PJ-1.5DQEW-CR10-CF

CR-H1142

TNC-PJ-2H-1.5D-CR10-CF

CR-H1101