Unit：mm

http://www.ddknet.co.jp

SSMB75 Series

4

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

○ Assembly Instruction（1）

8

Outer Conductor

Outer Jacket

50％

Ferrule

Insulator

Sleeve

Center Conductor

Insulator

2.8

1.5

●

0.5∼1

Center Conductor

Dies Surface

Body Surface

Contact

Insulator

No gap

Soldering

Connector

①

②

③

④

⑤

⑥

① Removing outer jacket

　Removing outer jacket as left figure.

② Insert ferrule and sleeve

　Insert ferule into the cable, stretch the outer

　conductor of the cable and insert sleeve.

　Cut off the outer conductor of the cable along

　the sleeve

③ Cutting cable

　

Cut the center conductor and insulator of the

　cable as left figure.

④ Crimping body

　Insert the body and crimp it by dies.

　Crimping body should be equal to body surface

　and　dies surface.

　

⑤ Soldering contact

　

Solder the contacts into the insulator and center

　conductor.

⑥ Assemble connector

　

Screw the connector.

　（Recommended screw torque : 29.4 N・㎝）