AD2S80A

–16–

APPLICATIONS

Control Transformer

The ratio multiplier of the AD2S80A can be used independently

of the loop integrators as a control transformer. In this mode the

resolver inputs

θ are multiplied by a digital angle φ any differ-

ence between

φ and θ will be represented by the AC ERROR

output as SIN

ωt sin (θ–φ) or the DEMOD output as sin (θ–φ).

To use the AD2S80A in this mode refer to the “Control Trans-

former” application note.

Dynamic Switching

In applications where the user requires wide band response from

the converter, for example 100 rpm to 6000 rpm, superior per-

formance is achieved if the converters control characteristics are

switched dynamically. This reduces velocity offset levels at low

tracking rates. For more information on the technique refer to

“Dynamic Resolution Switching Using the Variable Resolution

Monolithic Resolver-to-Digital Converters.”

OTHER PRODUCTS

The AD2S82A is a monolithic, variable resolution 10-, 12-, 14-

and 16-bit resolver-to-digital converter in a 44-terminal J-leaded

PLCC package. In addition to the AD2S80A functions it has a

VCO OUTPUT which is a measure of position within a LSB,

and a COMPLEMENT Data Output.

The AD2S81A is a low cost, monolithic, 12-bit resolver-to-

digital converter in a 28-lead ceramic DIP package.

REV. D