Product Specification

MF600SWI

Data sheet subject to change without notice

RDPS-MF051(R1)10/01/2002

SHEET 5 OF 11

5. Technical requirements:

5.1. Schematic:

The following drawing illustrates the schematic of this product.

5.2. ZHP-r definition:

To facilitate testing of the Single In-Line filter independently of the actual modem or specific

vendor, ZHP-r is defined to allow proper termination of the ADSL port during voice band

testing. The ZHP-r is valid only for voice band frequency. The combination of capacitors in

the ZHP-r is only representative. The input shall be 27 nF however derived. ZHP-r

equivalent circuit is shown below.

0.056 uF

0.056 uF

0.47 mH

100 ohms

1