IN-S63AS series

Side View SMD LED 0603 0.6mm PCB Type

Inolux Corporation

Proprietary & Confidential

March 16, 2017

www.inolux-corp.com

Page 13

Precautions

• Avoid exposure to moisture at all times during transportation or storage.

• Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.

• It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid applying a

reverse voltage.

• Avoid operation beyond the limits as specified by the absolute maximum ratings.

• Avoid direct contact with the surface through which the LED emits light.

• If possible, assemble the unit in a clean room or dust-free environment.

Reworking

• The iron tip must not come in contact with the copper foil.

• Twin-head type is preferred.

Cleaning

Following are cleaning procedures after soldering:

• An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.

• Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter

Cautions of Pick and Place

• Avoid stress on the resin at elevated temperature.

• Avoid rubbing or scraping the resin by any object.

• Electro-static may cause damage to the component. Please ensure that the equipment is properly

grounded. Use of an ionizer fan is recommended.