ACE24CP02C

I

2

C-Compatible Serial EEPROM

VER 1.1

1

Description

The ACE24CP02C is 2-Kbit I

Memory) device. It contains a memory array of 256 × 8bits, which is organized in 8 bytes per page.

ACE24CP02C provides the following devices for different application.

Features



Single Supply Voltage and High Speed

Minimum operating voltage down to 1.6V

1 MHz clock from 2.5V to 5.5V

400kHz clock from 1.7V to 2.5V



Low power CMOS technology

Read current 400uA, maximum

Write current 1.6mA, maximum



Schmitt Trigger, Filtered Inputs for Noise Suppression



Sequential & Random Read Features



Page Write Modes, Partial Page Writes Allowed



Write protect of the whole memory array



Self-timed Write Cycle (5ms maximum)



High Reliability

Endurance: > 1 Million Write Cycles

Data Retention: > 100 Years

ESD HBM: 4KV

Latch-up Capability: +/- 200mA



Package: USON3*2-8

Absolute Maximum Ratings

Storage Temperature

-60℃to 150℃

Operation Temperature

-40℃to 85℃

Maximum Operation Voltage

6.25V

Voltage on Any Pin with Respect to Ground.

-1.0V to (Vcc+1.0)V

DC Output Current

5.0 mA

Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a

stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational

listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device

reliability.