© 2015 TELEDYNE RELAYS

(800) 284-7007 • www.teledynecoax.com

CCR-53S/CR-53S Page 1

CCR-53S\CR-53S\092015\Q3

Series CCR-53S/CR-53S

Miniature DC–26.5 GHz

Latching SPDT Coaxial Switch

COAX SWITCHES

ELECTRICAL CHARACTERISTICS

Form Factor

SPDT,

break before make

Frequency Range

CCR-53S

CR-53S

DC–26.5 GHz

DC–26.5 GHz

Characteristic Impedance

50 Ohms

Operate Time

10 ms (max.)

Actuation Voltage Available

12 15 24 28 V

Actuation Current, max. @ ambient

140 170 90 65 mA

ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS

Operating Temperature

Commercial Model, CCR-53S

Elite Model, CR-53S

–40°C to 65°C

–55°C to 85°C

Vibration (MIL-STD-202 Method 214,

Condition D, non-operating)

10 g’s RMS

Shock (MIL-STD-202 Method 213,

Condition D, non-operating)

500 g’s

Standard Actuator Life

Actuator Life w/ Additional Features

5,000,000 cycles

1,000,000 cycles

Connector Type

SMA

Humidity (Moisture Seal)

Available

Weight

1.65 oz. (46.78g) (max.)

TYPICAL PERFORMANCE CHARACTERISTICS

Frequency

DC–4 GHz

4–8 GHz

8–12 GHz

12–16 GHz

16-20 GHz

20-26.5 GHz

Insertion Loss, dB,

typical.

0.2

0.2

0.2

0.3

0.4

0.4

Isolation, dB, typical.

90

90

80

70

65

65

VSWR , typical.

1.1:1

1.1:1

1.1:1

1.2:1

1.2:1

1.2:1

PART NUMBERING SYSTEM

Connector

S: SMA Female

Actuator Voltage

6: 28 Vdc Latching

7: 15 Vdc Latching

8: 12 Vdc Latching

9: 24 Vdc Latching

Actuator Type

0: Standard Contacts

C: Indicator Contacts

D: Self Cutoff Only

E: Indicators and Self Cutoff

**SEE PARTS LIST ON PAGES 8-9

Options

T: TTL Drivers with Diodes

D: Transient Suppression

Diodes

R: Positive + Common

N: Narrow Body

M: Moisture Seal

S: 9 Pin D-Sub Connector

Actuator Voltage

CCR-53 S 6 C - T **

Series

Connectors

Actuator Type

Options

For other options, contact factory.

PART NUMBER DESCRIPTION

CCR-53S

Commercial Latching SPDT, DC-26.5GHz

CR-53S

Elite Latching SPDT, DC-26.5GHz

The CCR-53S/CR-53S is a broadband, SPDT, electromechanical, coaxial switch designed to switch

a microwave signal from a common input to either of two outputs. The characteristic impedance is 50

Ohms. The small switches incorporate SMA connectors.

The CCR-53S/CR-53S series switch is offered with a latching actuator. This design is compatible with

the two most common mounting hole patterns. The CCR-53S/CR-53S series switch is interchangeable

with a variety of switches.

For maximum limits, please see charts on page 3-5

Available with

USB & Ethernet

Control!

Click here

MMA SERIES