| 制造商 | 部件名 | 数据表 | 功能描述 |
 WAGO Kontakttechnik Gmb... |
210-708
|
54Kb/4P
|
Steel camier rait 35 x 15 mm; 23mm thick;2m long; unsloted;according to EN 60715; silver-colored
17. 10. 2023
|
|
210-719
|
349Kb/9P
|
THR PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 7-pole; Push-in CAGE CLAMP®; 1,50 mm²; black
13.09.2021
|
|
210-719
|
229Kb/7P
|
Distribution terminal block; with push-button; 1 x 6 mm² / 6 x 1.5 mm²; with integrated end plate; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray
03.11.2022
|
|
210-719
|
302Kb/7P
|
Ground resistance signaling module; Ground fault alarm via digital output; Supply voltage: 24 VDC; Module width: 18 mm
01.10.2021
|
|
210-720
|
638Kb/7P
|
Relay module; Nominal input voltage
03.10.2022
|
|
210-720
|
684Kb/13P
|
PCB terminal block; 2.5 mm²; Pin spacing 5/5.08 mm; 10-pole; CAGE CLAMP®; commoning option; 2,50 mm²; gray
20.06.2023
|
|
210-720
|
154Kb/17P
|
4-conductor through terminal block; 4 mm2; center marking;for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP;4,00 mm2;red
17. 10. 2023
|
|
210-720
|
347Kb/9P
|
4-conductor terminal strip; without push-buttons; with fixing flanges; 11- pole; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray
29.12.2021
|
|
210-721
|
680Kb/9P
|
3-conductor through terminal block; with push-button; 10 mm²; with test port; suitable for Ex i applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 10,00 mm2; blue
05.09.2019
|
|
210-721
|
1Mb/11P
|
2-conductor through terminal block; 16 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 16,00 mm²; blue
24.09.2020
|
|
210-721
|
229Kb/7P
|
Distribution terminal block; with push-button; 1 x 6 mm² / 6 x 1.5 mm²; with integrated end plate; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP®; 6,00 mm²; gray
03.11.2022
|