Description
Scotchgard™ Extraction Cleaner Concentrate 27A is to be diluted and dispensed using the 3M™ Flow Control System Wall Mount Dispenser or 3M™ Flow Control System Portable Dispenser. Scotchgard™ Extraction Cleaner Concentrate 27H is to be diluted and dispensed using the 3M™ Twist ’n Fill™ Cleaning Chemical Management System. This product is formulated to effectively clean heavily soiled carpets. Scotchgard™ Extraction Cleaner Concentrate is formulated for use with Scotchgard™ Carpet and Upholstery Protector Concentrate and is an important part of the 3M carpet care system. Special Features  Heavy-duty formula  Low-foaming formula  Neutral pH  No sticky residue to cause re-soiling  Carpet and Rug Institute (CRI) Seal of Approval

Applications
■ Commercial and residential carpets
■ Most carpet fibers (nylon, polyester,
■ olefins, wool and blends)
■ Most carpet styles (loop or cut piles)
■ Safe for use on stain-resistant nylon fibers Packaging Scotchgard™ Extraction Cleaner Concentrate 27A One 0.5 gallon bottle per box 4 boxes per case Each 0.5 gallon bottle makes 55 ready-to-use gallons Scotchgard™ Extraction Cleaner Concentrate 27H One 0.528 gallon bottle per box 6 boxes per case Each 0.528 gallon bottle makes 53 ready-to-use gallons General Use Directions 1. Vacuum the carpet area thoroughly. 2. Place the ready-to-use extraction cleaner solution directly into the solution tank of your carpet extractor or into the solution tank of your sprayer. Pre-spray and extract method 1. Fill the extractor with warm to hot water only. 2. Apply the extraction cleaner to the carpet area using a 3M™ All Purpose Sprayer (Model AP-1) or a bulk pressurized sprayer at a rate of ~50 ft. per diluted gallon. 3. Allow 1-3 minutes dwell time. 4. Provide agitation to heavily soiled areas using a brush or 3M™ Carpet Bonnet Pad (optional). 5. Extract the carpet using overlapping passes of the extraction wand. 6. Move the extractor slowly over the carpet, making two passes. 7. Dispense rinse water throughout the 1st pass. 8. On the 2nd pass, vacuum only – do not apply additional water. 9. Apply Scotchgard™ Carpet and Upholstery Protector Concentrate to carpet immediately following extraction cleaning. Extractor method 1. Extract the carpet using overlapping passes of the extraction wand. 2. Move the extractor slowly over the carpet, making two passes. 3. Dispense the extraction cleaner throughout the 1st pass. 4. On the 2nd pass, vacuum only – do not reapply solution. 5. Apply Scotchgard™ Carpet and Upholstery Protector Concentrate to carpet immediately following extraction cleaning.