General Description
The DM9013 is a fully integrated and cost-effective fast Ethernet switch controller with two ports 10M/100M PHY, one port MII or RMII or Reverse MII interface, and general processor bus interface. The controller provides basic Layer-2 switch functions and advanced IEEE 802.1Q VLAN and priority queuing scheme. The integrated two ports PHY are compliant with IEEE 802.3u standards. The MII interface provides the flexibility to connect Ethernet PHY or SoC with MII/RMII interface. The DM9013 provides direct interface to the general processor bus with 8-, 16-, or 32-bit data to access internal memory.

Features
❐ Ethernet Switch with two 10/100Mb PHY, one MII/RMII, and general processor bus interface
❐ Support Reverse-MII
❐ Processor bus slave architecture
❐ EEPROM interface for power up configurations
❐ Support TCP/UDP/IPv4 checksum offload
❐ Support HP Auto-MDIX
❐ Support IEEE 802.3x Flow Control in Full-duplex mode
❐ Support Back Pressure Flow Control in Half-duplex mode
❐ Per port support 4 priority queues by Port-based, 802.1P VLAN, and IP TOS priority
❐ Support 802.1Q VLAN up-to 16 VLAN group
❐ Support VLAN ID tag/untag options
❐ Per port support bandwidth, ingress and egress rate control
❐ Support Broadcast Storming filter function
❐ Support Store and Forward switching approach
❐ Support up-to 1K Uni-cast MAC addresses
❐ Automatic aging scheme
❐ Support MIB counters for diagnostic
❐ uP data bus driving capability adjustable
❐ Port 2 TXD/TXE driving capability adjustable
❐ Auto. control to prevent memory read count error
❐ 128-pin LQFP 1.8V internal core, 3.3V I/O with 5V tolerant